Genuine Dimplex Opti-Myst Glass Disk Transducer | Part M-011B | Burbank Danville Redway Tahoe & More

Details

Genuine Dimplex Opti-Myst Glass Disk Transducer – M-011B Genuine OEM Dimplex Opti-Myst replacement glass disk transducer for electric wall fires and cassette fires. The transducer generates the ultrasonic vibration that creates the water mist effect. A direct like-for-like replacement to restore your fire’s mist effect. Key Details • Genuine Dimplex spare part – Classification: Original • Part number: M-011B • For use with Dimplex Opti-Myst electric fires Compatible Models • Alameda: ALM20 (Series A) • Auberry: AUB20 (Series A) • Burbank: BBK20 (Series A–D), BBK20 (Series E) • Cassette: CAS400HLL, CAS400NHLL, CAS600, CAS600NH • Danville: DNV20AB (Series A–C), DNV20BL (Series A onwards), DNV20BR (Series A–C), DNV20CH (Series A onwards) • Moorefield: MFD20 (Series A) • Oakhurst: OKT20 (Series A) • Redway: RDY20 (Series A–D), RDY20 (Series E) • Remote Control: RTOPCS20, RTOPI20BR, RTOPI20CH, RTOPW20 • Sacramento: SCR20 (Series A) • Silverton: SVT20 (Series A) • Tahoe: TAH20 (Series A), TAH20 (Series E) • Westbrook: WBK20 (Series A) • Whitmore: WMR20 (Series A) Please verify your Dimplex model and series number before ordering to confirm compatibility. Troubleshooting Guide No mist at all • Check the water tank has sufficient water so the sump is filled and covers the transducer. • Ensure the transducer is plugged in and seated correctly in the sump, and that the black lead is not crossing over the top of the transducer disc – this can prevent mist forming. • If the above steps haven’t resolved the issue, the sump fan may have failed. Remove the water tank and mist nozzle, then gently insert the cleaning brush (supplied with your Opti-Myst) into the air outlet on the top right of the sump. You should hear a sound and feel vibration if the fan is working. • Check all four lamps are fitted and working. No mist after 30 seconds • Check the transducer is plugged in and seated correctly. Ensure the black lead is not covering the white disc. • Follow a regular cleaning regime and remove any calcium deposits from the transducer using the cleaning brush. Mist cuts out intermittently • Check there is sufficient water in the sump and the sump fan turns freely. • Check the transducer is seated correctly and the fan filter is positioned correctly. Also check no water has got underneath the glass disk. Too much mist • Adjust the mist effect setting down on the fire. • If the problem continues, this may be a mist control issue – contact a service engineer.